Are you thinking of studying Metallurgical and Materials Engineering at the University of Nigeria, Nsukka (UNN)? If you are one of the Aspirant looking to study Metallurgical and Materials Engineering at the University of Nigeria, Nsukka (UNN) Then you are in the right page. This post gives you the key details you need know about UNN Metallurgical and Materials Engineering the possible cut-off mark and subject combination to the admission requirements, Direct Entry requirements, school fees, and more.
We’ve also added information about career prospects and what to do if you fall short of the UNN Metallurgical and Materials Engineering Requirements and Cut-Off Mark. Feel free to ask us your questions in the comment section if you have any, you can also drop your contribution in the comment section if possible.
Overview of Metallurgical and Materials Engineering at UNN
Metallurgical and Materials Engineering is one of the engineering courses offered at the University of Nigeria, Nsukka. The course is focused on the study of metals and materials, their properties, production, design, and application. It blends both theory and practical knowledge.
The department is located at the Nsukka campus and prepares students for various roles in industries like oil and gas, steel and metallurgy, manufacturing, construction, power and energy, and other related fields.
Admission Requirements for Metallurgical and Materials Engineering at UNN
If you’re aiming to apply for Metallurgical and Materials Engineering at UNN, here’s what you must have:
UNN Post-UTME/Screening requirements
To qualify for Post-UTME/Screening Registration, you need to score at least 160 in your JAMB. But you need to know that scoring 160 might not be enough, this means the higher your JAMB score, the better your chances.
JAMB Subject Combination for UNN Metallurgical and Materials Engineering
When registering for JAMB, select the correct subjects:
- English Language (Compulsory)
- Mathematics
- Physics
- Chemistry
Wrong combinations can cost you admission, so make sure you choose correctly.
O’Level Subjects Required for UNN Metallurgical and Materials Engineering
You need a minimum of five credit passes in not more than two sittings. The required subjects are:
- English Language
- Mathematics
- Physics
- Chemistry
One other science subject like Further Maths or Technical Drawing, remember that a good O’level result grade will enhance your chances for gaining admission into the department of Metallurgical and Materials Engineering at the university of Nigeria nsukka, (UNN).
Your O’Level result must meet these requirements before you’ll be considered.
Direct Entry Admission requirement for UNN Metallurgical and Materials Engineering.
For Direct Entry candidates, UNN accepts:
Two A’level passes from Chemistry, Physics and Mathematics
Two A-Level passes in Mathematics, Chemistry and Physics
OR
A National Diploma (ND) or Higher National Diploma (HND) in Metallurgical/Materials Engineering or a closely related course with Upper Credit
Note: You must also meet the O’Level requirements listed above.
UNN Cut-Off Mark for Metallurgical and Materials Engineering 2025/2026
General JAMB Cut-Off: 160, this means that with 160 JAMB UTME score you are eligible to apply for Metallurgical and Materials Engineering at UNN.
UNN Departmental Cut-off Mark for Metallurgical and Materials Engineering 2025/2026
As of the time we are making this post, UNN hasn’t released the departmental cut-off mark for Metallurgical and Materials Engineering, and for many years now, they have not published their departmental cut-off marks to the public. This post is solely to guide you on what you should expect or prepare for if you are an aspirant.
But through our research, as of the 2023/2024 and 2024/2025 academic sessions, the Metallurgical and Materials Engineering departmental cut-off mark is usually 205 and above. This means that due to how significant the course is at the University of Nigeria, Nsukka, you will need a score of 205 and above to be able to compete for the spaces available.
This course is moderately competitive. If you want a better chance of getting in, aim for 205 or higher in your JAMB, but note that it doesn’t mean you cannot gain admission with a JAMB score below 204. There is possibility that the departmental cut-off mark might be low in this year’s academic session, so please wait for admission if you have registered for the UNN Screening registration. A JAMB score below 200 still has a chance of gaining admission especially with a good O’level result and in the subsequent admission list that comes out after the Primary Admission List.
Things to Note about the UNN Metallurgical and Materials Engineering Cut-off mark
- The Cut-off mark changes every academic year, so you should know this.
- The UNN Metallurgical and Materials Engineering Cut-off mark is not officially published by UNN, so it can only be through research which might take time sometimes to get.
- If we have any information about the UNN Metallurgical and Materials Engineering we will update this page immediately.
Brief Note on Cut-Off, ELDS and Catchment Area Advantage
While the UNN Metallurgical and Materials Engineering cut-off mark is usually from 205 and above due to its competitiveness, admission doesn’t rely on merit alone. Candidates from states under UNN’s catchment area such as Enugu, Anambra, Imo, Ebonyi, Abia and those from educationally less developed states (ELDS) like Bayelsa, Taraba, and Zamfara etc, may still have an edge even with slightly lower scores.
Admission can still favour you if you’re from an ELDS or the Catchment areas as UNN considers federal policies meant to balance educational opportunities across regions.
How to Calculate UNN Post-UTME Screening for 2025/2026
The aggregate score for last year was calculated using this formula:
Aggregate = 90% of JAMB score + 10% of Post-UTME score (PUTME)
Or:
(0.9 × JAMB Score) + (0.1 × PUTME Score)
O’Level Results (WAEC, NECO, NABTEB)
Grade to Points Conversion:
- A1 = 90
- B2 = 80
- B3 = 70
- C4 = 60
- C5 = 50
- C6 = 40
- D7 to F9 = 0
For one sitting (using only one result), add 40 extra points.
Example calculation:
If a student has the following O-Level results:
- English Language: B3 = 70
- Mathematics: A1 = 90
- Chemistry: B3 = 70
- Physics: C5 = 50
(Single sitting) and scores 296 in JAMB, the calculation would be:
70 + 90 + 70 + 50 = 280
Add 40 points for one sitting: 280 + 40 = 320/400
PUTME Score = 320
JAMB Score = 296
Determine the UNN Final Aggregate Score
Aggregate = (90% of 296) + (10% of 320)
= (0.9 × 296) + (0.1 × 320)
266.4 + 32
= 298.4
Both your JAMB and Post-UTME scores are important.
UNN School/Tuition Fees for Metallurgical and Materials Engineering
Below is an estimate of the school fees: Faculty of Engineering, Department of Metallurgical and Materials Engineering:
Level & School Fees
- 100 = ₦116,050
- 200 = ₦96,650
- 300 = ₦74,000
- 400 = ₦74,000
- 500 = ₦70,500
Fees may be updated anytime, so always confirm from the UNN official portal.
Courses You Can Consider If You Don’t Meet the Cut-Off
If you don’t reach the cut-off mark, these are alternative courses with the same JAMB subject combination as Metallurgical and Materials Engineering at UNN:
- Civil Engineering
- Mechanical Engineering
- Pure and Industrial Chemistry
- Physics and Astronomy
- Electronics and Computer Engineering
- These courses still lead to strong career opportunities.
Career Paths for Metallurgical and Materials Engineering Graduates
Graduates from UNN’s Department of Metallurgical and Materials Engineering can work in many sectors such as:
- Oil and Gas
- Manufacturing and Production
- Metal/Steel Fabrication
- Power and Energy
- Engineering Design and Failure Analysis
- Government Engineering Units
- Research and Development
You can also go for postgraduate studies or professional certifications.
Recommended Articles to read
- How to Pass UNN Exams: Methods and First-Class Student Strategies
- UNN Civil Engineering Requirements and Cut-Off Mark
- UNN 2024/2025 School fees for all Courses
- 10+ Alternative Courses to Study with a Low JAMB Score in 2025 (Even Below 200)
- Top 10 Important Skills to Learn Before Graduating in Nigeria
- Top 10 Nigerian private universities offering scholarships 2025
- Sure 80/100 in your GSP 111 exam see most possible Questions & Answers [Download Here]
Frequently Asked Questions (FAQs)
Can I choose UNN as second choice for Metallurgical and Materials Engineering?
No. UNN only accepts candidates who choose them as first choice in JAMB.
Does UNN accept two sittings in O’Level result for this course?
Yes. UNN allows candidates to combine O’Level results in up to two sittings – including WAEC, NECO, and NABTEB combination for admission into Metallurgical and Materials Engineering (and most other courses). The Department requires at least five credit passes in Mathematics, Physics, Chemistry, English Language, and one other science subject.
How many admission lists does UNN release?
UNN usually releases about 4 to 7 admission lists, including UTME, Direct Entry, and supplementary lists.
How long is the Metallurgical and Materials Engineering program?
It’s a 5-year course for UTME candidates and 4 years for Direct Entry students.
Where is the department located?
It is located at the Nsukka campus of the University of Nigeria, Under Enugu State.
Final Note
Metallurgical and Materials Engineering at UNN is a solid course with real career value. If you’re serious about getting in:
Aim for a JAMB score of 240 and above. Yes, aiming for a score of 240, 250 and above increases your chance of gaining admission in the Department of Metallurgical and Materials Engineering at the University of Nigeria, Nsukka (UNN). This is because the course is moderately competitive. But this doesn’t mean you can’t gain admission with a 200+ JAMB score. It’s possible to gain admission with a score below 240.
Prepare properly for the Post-UTME. Though UNN might use the screening methods of O’level result and JAMB this year, preparing for the Post-UTME exam is not a bad move. It will help you a lot even if you gain admission.
Ensure you meet the O’Level subject requirements, because not meeting the O’level requirements will get you disqualified at the end.
Follow only verified updates from UNN or platforms like Campus Informant
If this post was helpful, kindly share it with others. Do you have any suggestions or you have a question to ask us? Then use the comment section below this post we will respond to you as soon as possible.
We wish you success in your admission process.
