UNN Mechatronic Engineering Requirements and Cut-Off Mark

UNN Mechatronic Engineering Requirements and Cut-Off Mark: UNN Mechatronic Engineering Requirements and Cut-Off Mark: Are you thinking of studying Mechatronic Engineering at the University of Nigeria, Nsukka (UNN)? This post gives you the key details you need from the official cut-off mark and subject combination to the admission requirements, Direct Entry requirements, school fees, and more.

We’ve also added information about career prospects and what to do if you fall short of the requirements.

Overview of Mechatronic Engineering at UNN

Mechatronic Engineering is one of the fast-rising engineering courses offered at the University of Nigeria, Nsukka. The course is focused on integrating mechanical, electronic, and computer systems to design and build intelligent machines and automation systems. It blends both theoretical concepts and hands-on skills.

The department is located at the Nsukka campus and prepares students for roles in fields such as robotics, manufacturing, control systems, automation, and related industries.

Attention: Stay UPDATED with the Latest INFORMATION and GIST about your preferred UNIVERSITY/SCHOOL And Scholarship updates on WhatsApp. 👉 CLICK HERE TO JOIN NOW!

Admission Requirements for Mechatronic Engineering at UNN

If you’re aiming for Mechatronic Engineering at UNN, here’s what you must have:

UNN Post-UTME/Screening Eligibility

To qualify for Post-UTME/Screening Registration, you need to score at least 160 in your JAMB. The higher your JAMB score, the better your chances.

JAMB Subject Combination

When registering for JAMB, select the correct subjects:

English Language (Compulsory)
Mathematics
Physics
Chemistry

Wrong combinations can cost you admission, so make sure you choose correctly.

O’Level Subjects Required

You need a minimum of five credit passes in not more than two sittings. The required subjects are:

English Language
Mathematics
Physics
Chemistry
One other science subject like Further Maths or Technical Drawing

Your O’Level result must meet these requirements before you’ll be considered.

Direct Entry Admission

For Direct Entry candidates, UNN accepts:

Two A’level passes from Chemistry, Physics and Mathematics

Two A-Level passes in Mathematics, Chemistry and Physics

A National Diploma (ND) or Higher National Diploma (HND) in Mechatronic Engineering or a closely related course with Upper Credit

Note: You must also meet the O’Level requirements listed above.

UNN Cut-Off Mark for Mechatronic Engineering 2025/2026

General JAMB Cut-Off: 160. This means that with a 160 JAMB UTME score, you are eligible to apply for Mechatronic Engineering at UNN.

UNN Departmental Cut-off Mark for Mechatronic Engineering 2025/2026

As of the time we are making this post, UNN hasn’t released the departmental cut-off mark for Mechatronic Engineering. For many years now, they have not published their departmental cut-off marks to the public. This post is solely to guide you on what you should expect or prepare for if you are an aspirant.

But through our research, as of the 2023/2024 and 2024/2025 academic sessions, the Mechatronic Engineering departmental cut-off mark is usually 235 and above. This means that due to how competitive the Mechatronic Engineering course is at the University of Nigeria, Nsukka, you will need a score of 235 and above to be able to compete for the spaces available.

This course is competitive. If you want a better chance of getting in, aim for 235 or higher in your JAMB, but note that it doesn’t mean you cannot gain admission with a JAMB score below 235. There is a possibility that the departmental cut-off mark might be lower this academic session. So please wait for admission decisions by UNN if you have registered for the UNN Screening. A JAMB score below 230 still has a chance of gaining admission especially with a good O’level result, Also remember that a score below 230 can still gain admission in the subsequent lists that come out after the primary admission list.

Brief Note on Cut-Off, ELDS and Catchment Area Advantage

While the UNN Mechatronic Engineering cut-off mark is usually from 250 and above due to its competitiveness, admission doesn’t rely on merit alone. Candidates from states under UNN’s catchment area such as Enugu, Anambra, Imo, Ebonyi, Abia and those from educationally less developed states (ELDS) like Bayelsa, Taraba, and Zamfara etc., may still have an edge even with slightly lower scores.

Admission can still favour you if you’re from an ELDS or the Catchment areas, as UNN considers federal policies meant to balance educational opportunities across regions.

How to Calculate UNN Post-UTME Screening for 2025/2026

The aggregate score for last year was calculated using this formula:

Aggregate = 90% of JAMB score + 10% of Post-UTME score (PUTME)

Or:

(0.9 × JAMB Score) + (0.1 × PUTME Score)

O’Level Results (WAEC, NECO, NABTEB)

Grade to Points Conversion:

A1 = 90
B2 = 80
B3 = 70
C4 = 60
C5 = 50
C6 = 40
D7 to F9 = 0

For one sitting (using only one result), add 40 extra points.

Example calculation:

If a student has the following O-Level results:

English Language: B3 = 70

Mathematics: A1 = 90

Chemistry: B3 = 70

Physics: C5 = 50

(Single sitting) and scores 296 in JAMB, the calculation would be:

70 + 90 + 70 + 50 = 280

Add 40 points for one sitting: 280 + 40 = 320/400

PUTME Score = 320

JAMB Score = 296

Determine the UNN Final Aggregate Score

Aggregate = (90% of 296) + (10% of 320)

= (0.9 × 296) + (0.1 × 320)

266.4 + 32

= 298.4

Both your JAMB and Post-UTME scores are important.

UNN School/Tuition Fees for Mechatronic Engineering

Below is an estimate of the school fees: Faculty of Engineering, Department of Mechatronic Engineering:

Level & Fees

100 Level ₦116,050
200 Level ₦96,650
300 Level ₦74,000
400 Level ₦74,000
500 Level ₦70,500

Fees may be updated anytime, so always confirm from the UNN official portal.

Courses You Can Consider If You Don’t Meet the Cut-Of

If you don’t reach the cut-off mark, here are alternative courses with the same JAMB subject combination as Mechatronic Engineering at UNN:

Civil Engineering
Electronics and Computer Engineering
Metallurgical and Materials Engineering
Pure and Industrial Chemistry
Physics and Astronomy

These courses still lead to strong career opportunities.

Career Paths for Mechatronic Engineering Graduates

Mechatronic Engineering graduates from UNN can work in many sectors such as:

Robotics and Automation
Manufacturing and Production
Aerospace and Automotive
Control Systems and Instrumentation
Artificial Intelligence Applications
Government Engineering Units
Research and Development
You can also go for postgraduate studies or professional certifications.

Frequently Asked Questions (FAQs)

What’s the merit Cut-off mark for Mechatronic engineering at UNN?

UNN doesn’t publish their departmental cut-off marks but with research on past the admission, I will say that a UTME score of about 230+ with a good O’level result gives you a better chance to gain admission in Mechatronic engineering at UNN.

Can I choose UNN as second choice for Mechatronic Engineering?

No. UNN only accepts candidates who choose them as first choice in JAMB.

Does UNN accept two sittings in O’Level result for Mechatronic Engineering?

Yes. UNN allows candidates to combine O’Level results in up to two sittings – including WAEC, NECO, or a combination. You need at least five credit passes in Mathematics, Physics, Chemistry, English Language, and one other science subject.

How many admission lists does UNN release?

UNN usually releases about 4 to 7 admission lists, including UTME, Direct Entry, and supplementary lists.

How long is the Mechatronic Engineering program?

It’s a 5-year course for UTME candidates and 4 years for Direct Entry students.

Where is the department of Mechatronic Engineering located?

It is located at the Nsukka campus of the University of Nigeria. Those offered admission in the course will start at Nsukka Campus from their first year and also Finnish in the same campus, they won’t be transferred to UNEC like the department of Medicine and Surgery, Nursing etc.

Final Note

Mechatronic Engineering at UNN is a solid course with real career value. If you’re serious about getting in:

Aim for a JAMB score of 230 and above. This increases your chance of gaining admission because of the course’s competitiveness. But you can still be admitted with a score below 250, especially with strong O’Level results and patience for the later lists.

Prepare properly for the Post-UTME. Even if UNN uses the screening method of O’Level and JAMB this year, practicing for Post-UTME can still boost your confidence and academic skills.

Ensure you meet the O’Level subject requirements. Failure to meet this can disqualify you even if your JAMB is high.

Follow updates from UNN or platforms like Campus Informant.

If this post was helpful, kindly share it with others. Got a question or suggestion? Use the comment section below, and we’ll respond as soon as possible.

We wish you success in your admission process.

Share this in your Study Group: